Audio Technica AT-LPW50PB Turntable in Piano Black
Audio Technica AT-LPW50PB Turntable in Piano Black
Introducing the AT-LPW50PB Turntable
Beautiful in Piano Black
The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fibreboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.
The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge (black). Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Stunning Look, Stunning Sound
Marked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.
Designed for a Higher Level of Listening
The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fibre tonearm and comes with an AT-HS4 universal ½”-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.
Product Features
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- Motor features a speed-sensor system to maintain accurate platter rotation speed
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminium platter with rubber mat
- AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
- AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance 30 mm thick MDF (medium density fibreboard) plinth with high-gloss, piano-black finish
- High-isolation, height-adjustable feet
- Built-in switchable phono preamplifier for phono or line-level output
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
Technical Specifications
Type
Belt drive manual operation
Motor
DC servo motor with Active Speed Stabilisation
Drive Method
Belt-drive
Speeds
33⅓ & 45 RPM
Turntable Platter
Die case aluminium
Wow & Flutter
< 0.15 % WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio
> 60 dB
Output Level
Pre-Amp PHONO
4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-Amp LINE
200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain
35 dB nominal, RIAA equalised
Power Supply Requirements
100 to 240 V, 50/60 Hz, 0.5 A Max.
Finish
Piano Black Gloss
Dimensions (W x Dx H)
With dustcover
420.0 mm (16.54") x 356.0 mm (14.02") x 126.0 mm (4.96")
Without dustcover and hinges
420.0 mm (16.54") x 356.0 mm (14.02") x 114.0 mm (4.49")
Weight
5.56 Kg (12.26 lbs)
Warranty
1 Year
In the Box
- At-LPW50PB turntable
- Dustcover and dustcover hinges
- Platter
- Turntable mat
- Drive belt
- Counterweight
- AT-HS4 Headshell
- AT-VM95E Stereo Cartridge (black)
- 45 RPM adapter
- RCA Audio Cable (approx. 1.0 m (3.3'))
- AC adapter (approx. 1.5 m (4.9'))
*This information has been obtained from Manufacturers website. We advise that Features & Specifications are subject change without notice.
E&OE